e-motion [v50]sgi
All-glass lamellas “structure glazing”, with added safety
Panel section [v50]sgi
1. Lamellas laterally linearly held
2. Lamella joint with profile sealing silicone black
Equipment Options
Clamping adapter 38 mm
Mullion / transom adapter to bridge a larger width with a clamping thickness of 24 mm and an adapter depth of 38 mm. Only in connection with 2-fold insulation glazing.
RC Burglary protection
Classification of the resistance against manual burglary attempts. Only in connection with P4A glazing.
3-fold ISO glazing
Frames, sealing and wing profiles adapted to the glass thickness. 3-fold insulation glazing with hot edge stainless steel black. Glass thickness depending on the system.
Panel
Two-shell aluminium compound panel alternatively to the infill with insulating glass panes. Possible panel thickness depending on the system.
Hand crank
Manual window operation by means of a pluggable hand crank. Positioning at the top or bottom frame profile.
Drive 230 V
230 V drive visibly recessed in the bottom frame profile. Optionally only for facade windows up to a surface of about 2 sqm.
Power supply unit
Upstream power supply unit 230 V/24 V for direct connection to 230 V. Invisibly integrated in the frame profile and wired ready to work.
Pinch protection contact-afflicted
Contact switch strips protection class 4 according to VFF (Association Windows + Facade) KB01. Possible securing of all main and secondary closing edges from the inside to the outside. Wired ready to work with a control module (integrated in the frame profile)
Contactless pinch protection
Window securing from the inside contactless via combined infrared radar sensors. Protection class 4 according to VFF (Association Window + Facade) KB01. Wired ready to work (integrated in the frame profile).
Insect protection
Aluminium frame can be covered with different webs. With spring pins for easy installation in the window frame reveal.
Description
- The insulation glasses of the lamellas are linearly held inside with a 4-sided circumferential aluminium frame made of thermally separated profiles. Secured against maelstrom from the outside to the inside point by point using black stainless steel clips.
- The UV-resistant edge compound and the thermally improved spacers as well as the glass levels have been covered from a 4-sided frame enamelling in Pos. 2 of the single pane safety glass H 8 mm outer sheet.
- Polished edge processing on glass levels otherwise arrissed.
- Inner pane according to the technical regulations for the use of accident-proof glazing (TRLV) as laminated safety glass.