simple [d]
Single glazed roof lamella window
3-D section frame profile simple [d]
Features
Internal and external view
- Corners tightly welded
Cable outlet
- Cable outlet on the motor 230 V
Glass carrier centre
- Fitting to swivel open: Stainless steel A2, surface barrel finished
Equipment options
Hand crank
Manual window operation by means of a pluggable hand crank. Positioning at the top or bottom frame profile.
Drive 230 V
230 V drive visibly recessed in the bottom frame profile. Optionally only for facade windows up to a surface of about 2 sqm.
Contactless pinch protection
Window securing from the inside contactless via combined infrared radar sensors. Protection class 4 according to VFF (Association Window + Facade) KB01. Wired ready to work (integrated in the frame profile).
Insect protection
Aluminium frame can be covered with different webs. With spring pins for easy installation in the window frame reveal.
System description
- For assemblies on concrete or wood upstands, tiled roofs or also for classical mullion / transom systems, the outer shell of the frame can be individually canted.
- Installation position from 10° to about 80°.
- Inner circumferential aluminium frame with integrated drive mechanism in the mullions and with covered 24 V / 230 V electrical drive.
- Scaled lamella design held on suction and pressure point by point.
| Technical Features | simple [d] |
| Profile Details: | |
| Front thickness from the inside | 54 mm |
| Profile depth about | 70 mm |
| Clamping depth | – |
| Clamping thickness standard | 12 mm |
| Integrated fitting technique made of stainless steel | Yes |
| Lamella height: | From 250 mm to 800 mm |
| Element sizes: | Wide AK frame at least from 450 mm to max. 5.000 mm |
| Opening angle: | Depending on the lamella height ranging up to 75 degrees |
| Inspections: | |
| Tightness during driving rain according to EN 12208 |
Not tested |
| Air tightness according to EN 12207 | Not tested |
| Wind load according to EN 12210 | Not tested |
| Sound protection Rw | Not tested |
| Natural smoke and heat exhaust ventilators according to EN 12101-2 | No |