simple system information
Single glazed window elements for facade and roof. Manufactured as requested by the customer. For smoke and heat extraction and for natural building ventilation. Maximum geometric ventilation cross sections are resulting within shortest time.
Construction + Fitting:
The system simple is a hinged lamella, where the stainless steel fittings push the lamellas open on a linear push rod. The push rod is ball bearing mounted and is synchronously driven; therefore, the lamellas are running very smoothly. By using this folding technique, the interior will be kept free for escape routes and at the same time highest tightness values are going to be achieved. The standard is about 600 Pascal.
Look + Design:
All-glass look, all around free glass edges and same face widths as well as a flat-mounted integration into facades distinguish the design of the window series simple. Depending on the architectural demands, the glasses are secured with common point holders or linearly fixed. Optionally, it is also possible to hold them on the outer edge of the plane by using filigree stainless steel clips.
Not thermally separated aluminium profile with clamping adapter for mullion / transom systems. The inspection hole provides the access to fitting and driving parts when installed. All window frames circumferentially have the same front thickness. Standard is a clamping adapter for 50-60 mm mullion / transom systems with a width of about 13 mm and optional adaptation of the clamping thickness. For larger entries, the clamping adapter can be optionally broadened. The surface is either anodised or powder-coated (RAL, DB, special colours).
Single glazing made of as single pane with a thickness of 12 mm as Float, laminated safety glass or single pane safety glass with polished edges.
Made of black silicone rubber for all temperature ranges with high resistance. Glass joint overlapping internally horizontally and without additional profile directly glued to the glass edge. The frame sealing circumferentially have the same profile and are equipped with a draining plane.
Special shapes e.g. trapezoidal shapes can be delivered upon request.
With optional attachments. Fixed glazing between the mullions according to the technical regulations for the use of accident-proof glazing (TRAV). Horizontal handrail with filling bars according to the regulations. An itemization is possible with a pendulum impact test without any additional attachments.
Determined by the system, it is almost impossible to enter through an opened lamella window. When closed, each individual lamella is mechanically locked. It is only possible to access by destroying the security glazing (single pane safety glass / laminated safety glass). It is possible to install reed contacts with VDS (German association of damage insurers) classification to monitor the opening.
It is possible to easily install mosquito nets on the frame.