simple [v50]
Weather protection facade system
3-D section frame profile simple [v50]s point
Features
Internal and external view
Retaining clip for simple [v50]
Point fastening for simple [v50]s point
Cable outlet
- 22 mm at the exit lateral variable at the exit top or bottom
Glass carrier simple [v50]
- Fitting to swivel open: Stainless steel A2, Surface barrel finished
- Glass carrier centre: Stainless steel A2, Surface powder coated black
Glass carrier simple [v50]s point
- Fitting to swivel open: Stainless steel A2, Surface barrel finished
- Glass carrier centre: Stainless steel A2, Surface powder coated black
Equipment Options
Drive 230 V
230 V drive visibly recessed in the bottom frame profile. Optionally only for facade windows up to a surface of about 2 sqm.
Power supply unit
Upstream power supply unit 230 V/24 V for direct connection to 230 V. Invisibly integrated in the frame profile and wired ready to work.
Contactless pinch protection
Window securing from the inside contactless via combined infrared radar sensors. Protection class 4 according to VFF (Association Window + Facade) KB01. Wired ready to work (integrated in the frame profile).
Insect protection
Aluminium frame can be covered with different webs. With spring pins for easy installation in the window frame reveal.
Systembeschreibung
- Die Wetterschutzfassade simple [v50] ist ein freitragendes System mit hoher Flexibilität. Treppenhäuser, Parkdecks oder Technikzentralen sind mögliche Anwendungsbeispiele.
- Mit einem Antrieb können Fassadenelemente bis 4 x 4 m bedient werden. In dem 2-schaligen Aluminiumrahmen sind sämtliche Antriebelemente einschließlich Motor unsichtbar integriert.
- Die Lamellen sind punktuell auf Sog und Druck gehalten (ggf. ZIE erforderlich).
- Bei Spannweiten >1500 mm wird ein zusätzlicher Unterstützungspfosten erforderlich.
- Die Verglasung kann bis ca. 4 m Breite an einem Stück ausführt werden. Größte Flexibilität auch beim Lamellenstoß: gestuft, flächenbündig oder geschuppt.
| Technical Features | simple [v50] |
| Profile Details: | |
| Front thickness from the inside | 50 mm |
| Profile depth about | 120 mm |
| Clamping depth | – |
| Clamping thickness standard | 12 mm |
| Integrated fitting technique made of stainless steel | Yes |
| Lamella height: | From 250 mm to 800 mm |
| Element sizes: | Wide AK frame at least from 450 mm to max. 5.000 mm |
| Opening angle: | Depending on the lamella height ranging up to 90 degrees |
| Inspections: | |
| Tightness during driving rain according to EN 12208 |
Not tested |
| Air tightness according to EN 12207 | Not tested |
| Wind load according to EN 12210 | Not tested |
| Sound protection Rw | Not tested |
| Natural smoke and heat exhaust ventilators according to EN 12101-2 | No |